TMC

LS Truck/SUV Alternator Relocation Bracket Item Number: LS-0203

LS Truck/SUV Alternator Relocation Bracket Item Number: LS-0203LS Truck/SUV Alternator Relocation Bracket
Cost: $285.00 
 On Sale: $235.99  plus shipping

Detailed Description:

This alternator relocate bracket is designed to lower your alternator down 3/4 inch below the top of a LS1,LS2,LS3 intake manifold. It will retain the power steering pump in the stock position.
This bracket is made so you can run a LS1,LS2 or any performance LS car intake manifold on the truck or SUV engine to gain hood clearance.
Works on any 4.8,5.3,5.7,6.0,and 6.2 Chevrolet 1999 to 2013 Including Gen III/IV truck engines.
This kit will work with the stock water pump and tensioner. We recommend using a 2002 camaro z28 tensioner
When instaling a car intake you may need to use a 2002 Camaro water pump and LS-0214 spacer kit to clear the throttle body
This bracket will work with the 2010 Camaro water pump and the correct tensioner.
Comes complete with 6061 billet aluminum spacers, two plates, GM spec. zinc coated bolts and instructions
Items needed to complete the kit:
Gates pulley # 36101
Gates belt # K060735
You will need a power steering pump puller and installer. These tools can be rented free from your Auto Zone or O’Reilly.

 

1998-02 LS1 camaro/GTO/S10 LS1 Alternator / Power Steering Pump Bracket

1998-02 LS1 camaroGTOS10 LS1 Alternator Power Steering Pump Bracket1998-02 LS1 camaro/GTO/S10 LS1 Alternator / Power Steering Pump Bracket
Cost: $299.00  On Sale: $249.99  plus shipping




Detailed Description:

This is LS Brackets New State of the art accessory drive power steering/alternator bracket

This bracket is CNC cut from 6061 3/8 billet aluminum

It is designed to work with the Factory Camaro power steering pump and alternator only
The factory Reservoir from the camaro with not fit this bracket.
Requires a Alternator from 1998-02 camaro or 1999 to 2013 Truck/SUV

This is the most user friendly alternator,power steering relocate bracket
on the market today.

This Bracket moves the factory alternator up high and
the factory power steering pump down low on
your LS power plant upgrade.
When using the Camaro crank pulley you gain the needed radiator clearance
for your fans. You will also save money not having to purchase water pump spacer kit
It gives frame clearance in older vehicles where the factory
alternator hits the frame and steering box.
There is a complete set of instructions with part numbers
Everything can be purchased from your local parts store.

Please Email with any question.

Designed to work with the Camaro/Truck/SUV ls 105 amp alternator

Comes complete with 6061 billet aluminum spacers, 3/8 billet plates, GM spec. zinc coated bolts and instructions.

LS TT Turbo Mount Stock Truck Exhaust Item Number: LS-0208

LS TT Turbo Mount Stock Truck Exhaust Item Number LS-0208Item: 1999 to 2013 LS TT Turbo mount Stock Truck exhaust
Cost: $299.00 
 On Sale: $250.99  plus shipping

Detailed Description:

This Bracket is made to work with Front Mount custom built turbo kits Stock 4.8,5.3,6.0 exhaust manifolds with a ls motor You don’t have to buy other exhaust manifolds like other kits.

This kit fits 1999 to 2012 GM Trucks and is a Alternator Power steering pump relocation bracket kit for Gen III/IV LS. This bracket relocates the Alternator and Power steering pump on the 4.8, 5.3, 5.7, 6.0, and 6.2. This kit is used when doing a engine swap or building a hot rod and installing a LS1, LS2, LS3, LS6 or any other performance LS car intake manifold on the truck engine. Moves the alternator down to 3/4 inch below the factory ls car intake to clear the hood.

It also moves the Power steering pump up and in to clear the frame. This kit will let you install any LS 99 to 2012 truck engine into a older car or pickup.

What is really nice about my design is that it reuses the factory LS alternator.

Power steering pump will come from a 1988 to 1989 Chevy pickup. You can reuse your factory pump but must change the can on the back. No more Remote Reservoir to buy a cost saving of over 100.00 and you get a cleaner looking install.

Water pump spacers along with the car intake are required to install the LS car intake or any other performance intake manifold.

This bracket is to be used with truck accessory drive only.

This bracket will relocate your truck alternator to the side and down and your power steering pump in and up to clear the frame.

Comes complete with 6061 billet aluminum spacers, two plates, GM spec. zinc coated bolts and instructions

Items needed to complete the kit:
~Two Idler pulleys
~A new belt
~Car ls1 intake
~Power steering pump-AC Delco 36-517091 ,Atsco 7091,A-1 Cardone 207826,
~Dorman Pulley 300-200
~Dorman cap 82581

This kit will work with the 2010 carmaro water pump and the correct tensioner for the Camaro pump. Water pump (ACDelco 251-734 ) No spacers are needed when use this pump. LS1 camaro water pump. Water pump spacer kit only if your using a 2002 carmaro water pump.

LS LQ4 LS1 Camaro High Mount Alternator Bracket

LS LQ4 LS1 Camaro High Mount Alternator BracketLS LQ4 LS1 Camaro High Mount Alternator Bracket
Cost: $299.00  On Sale: $235.99  plus shipping



Detailed Description:

This relocate bracket is designed to move the 1999 to 02 Camaro factory alternator to the top of the engine.

This kit does raise the factory power steering pump up 1″ higher than normal.

You will reuse your existing power steering pump,Idler pulley and alternator. If you’re having alternator clearance issues this is the bracket you need This kit will work with the stock water pump and tensioner comes complete with 6061 billet aluminum spacers, GM spec. zinc coated bolts and instructions we only use Zinc coated bolts to prevent rust.

Instead of cheap black bolts that will rust over time. The required belt ( Gates K060760 ) 145 amp alternator The required idler pulley if you don’t have your factory one ( Gates 36101 ) Comes with a complete set of instructions and part numbers.

All replacement parts can be bought from your local parts store. All my kits use standard off the shelf parts for easy replacement, another great feature.

Please Email with any question.

This bracket has been dyno tested and I have tons of happy customers Designed to work with all ls Truck/SUV alternators Comes complete with 6061 billet aluminum spacers, 3/8 billet plates GM spec. zinc coated bolts and instructions.

This brackets is also available for the Chevrolet 1999 to 2013 including Gen III/IV truck, LY6,L92 engines accessory drive.

Camaro LS L99 LS3 Alternator Bracket 3/8 Billet

Camaro LS L99 LS3 Alternator Bracket 38 BilletCamaro LS L99 LS3 Alternator Bracket 3/8 Billet
Cost: $299.00  On Sale: $279.99  plus shipping



Detailed Description:

Only a new belt is needed with this kit

When reusing all your factory 2010-13 camaro parts.

Does not come with the pictured A/C Bracket for the Sanden compressor.

This is LS Brackets New State of the art accessory drive power steering, upper alternator mount bracket.

This bracket is CNC cut from 6061 3/8 billet aluminum

It is designed to work with the Factory Camaro power steering pump, Alternator and accessory drive from a 2010-13 camaro

This is the most user friendly alternator,power steering relocate bracket on the market today.

This Bracket moves the factory alternator up high and and keeps the factory engine cover intact.

It gives frame clearance in older vehicles where the factory alternator hits the frame and steering box.

Comes with a complete set of instructions and part numbers

Everything can be purchased from your local parts store.

Please Email with any question.
This bracket has been dyno tested and I have tons of happy customers

Designed to work with the 2010-13 Camaro PS pump and alternator

Comes complete with 6061 billet aluminum spacers, 3/8 billet plates, GM spec. zinc coated bolts and instructions.

This bracket is also 100% compatible with any 5.3,5.7,6.0.6.2 engines using Truck/SUV Crank pulley with 2010-13 camaro accessory drive parts.

Trimming of the factory engine cover maybe needed for best fit.

Crate Engine Narrow Bay Conversion Bracket 3/8 Billet Aluminum

Crate Engine Narrow Bay Conversion Bracket 3/8 Billet AluminumCrate Engine Narrow Bay Conversion Bracket 3/8 Billet Aluminum
Cost: $265.00  On Sale: $229.99  plus shipping


Detailed Description:

This bracket is CNC cut from 6061 3/8 billet aluminum. This kit is for the LS3 or corvette accessory drive only

Can be special ordered for the camaro or Truck/SUV. The power steering pump is the same height as the LS3 intake runners.

It is designed to work with the Factory Camaro power steering pump, Alternator parts from a 1998 to 2002 camaro

This is the most user friendly alternator,power steering relocate bracket on the market today.
This Bracket moves the factory Camaro Power steering pump up 1″

You will need to change the power steering pulley to a Trail Blazer SS Pulley.

This kit is designed to work in 1996 camaro along with any other car or truck.

Kit can be special ordered for Camaro or Truck/SUV accessory drive

Comes with a complete set of instructions and part numbers

Everything can be purchased from your local parts store.

Does not come with the pictured A/C bracket

Please Email with any question.
This bracket has been dyno tested and I have tons of happy customers. Designed to work with the 1998 to 02 Camaro PS pump and alternator

Comes complete with 6061 billet aluminum spacers, 3/8 billet plates, GM spec. zinc coated bolts and instructions.

This bracket is also 100% compatible with any 5.3,5.7,6.0.6.2 engines using Corvette Crank pulley with 1998 to 02 camaro accessory drive parts

Items Needed to complete this Kit:
Power steering pump from a 1998 to 02 camaro
Alternator from a 1998 to 02 camaro or 105 amp from a truck/suv
Idler pulley
New Belt
Trail Blazer SS pulley (Dorman #300137)

LS2 2006-09 Trail Blazer SS

LS LS2 2006-09 Trail Blazer SSLS2 2006-09 Trail Blazer SS, 2004-06 GTO Alternator Swap Conversion Bracket
Cost: $295.00 
 On Sale: $245.99  plus shipping



Detailed Description:

Trail Blazer SS , GTO LS,LS1,LS2,LSX Power Steering/Alternator Conversion Bracket
This is LS Brackets New State of the art accessory drive power steering/alternator bracket

This bracket is CNC cut from 6061 3/8 billet aluminum. It is designed to work with the Factory 2006-09 Trail Blazer SS power steering pump and alternator.

The factory Reservoir from the Trail Blazer will not fit this bracket.

You will need to convert your power steering pump to a Remote reservoir.

The factory GTO power steering pump and pulley will not work with this bracket

You will have to change over to the 2006-09 Trail Blazer SS

Power steering pump and pulley.

The Factory GTO alternator will work with this bracket

You will need to reuse your factory GTO remote Reservoir. You will need to purchase part LS-0265 a 90 degree fitting for the trail blazer ss pump.

It gives frame clearance in older vehicles where the factory alternator hits the frame and steering box.

There is a complete set of instructions with part numbers

Comes complete with 6061 billet aluminum spacers, 3/8 billet plates, GM spec. zinc coated bolts and instructions.

This bracket is available for the Corvette.Camaro and Truck/SUV Accessory drive

Items Needed to complete kit:

Gates #38006 idler pulley

New Serpentine belt

Trail Blazer SS power steering pump and pulley

LS Brackets 90 degree pump fitting LS-0265

LS LS2 2006-09 Trail Blazer SS 2

Small Block Chevy to LS Adapter Plates Mounts Item Number:LS-0266

Small-Block-Chevy-to-LS-Adapter-Plates-Mounts-Item-Number-LS0266Cost: $98.99  On Sale: $85.99 plus shipping


Detailed Description:

Multi Postion LS Motor Mount Adapter Plates LQ, LS1, LS2, LS3,4.8, 5.3, 6.0,6.2

These plates are used to retrofit any 1998-2013 LS series engine into any 1960s to mid 80’s vehicle.

Includes left and right adapter plates and all necessary hardware.

These plates provide 11/16″ forward, 1″ back, and stock location holes.

11/16 Forward will move the engine ahead giving you more room at the firewall unlike other brackets that move the engine 1″ forward causing radiator clearance problems

The 1″ back will slide the LS engine back to meet the Transmission so you don’t have to change your drive shaft or other mounts. Provided you have Firewall clearance and your LS Heads don’t hit.

Stock postion will put the LS engine in the Factory location. This will cause you to move your transmission forward 1″ to meet the back of the LS block.

Key Features:

  • Manufactured from 3/8 6061 T-6 Aluminum
  • Brushed Satin finish
  • Works with G.M. Factory 3-Bolt Mounts
  • Has three mounting postion
  • Two plates per pack, with hardware
  • Made in U.S.A.

Low Mount Alternator

Low-Mount-Alternator-Item-Number-LS-0267-01Cost: $189.99  On Sale: $163.99 plus shipping


Detailed Description:

This is a full billet low mount aluminum alternator relocate bracket for all LS engines 1999 to 2012 using the truck accessory drive.

Bracket can be ordered for the camaro accessory drive.

This bracket kit places the factory 105 amp alternator down low like on the factory LS1 1999 to 02 camaro accessory drive and deletes the power steering pump.

Steel truck blocks do not have all the mounting points to run the factory camaro brackets.

This bracket will work with the stock truck water pump.

Can be used with the 1999 to 02 camaro water pump when using the correct spacers. ( LS Brackets spacers LS-0214 )
Designed to work with all ls 99-04 truck or 98-02 LS1 camaro 105 amp alternator

Comes complete with 6061 billet aluminum spacers,Two plates, GM spec. zinc coated bolts and instructions.

Items needed to complete the kit:

  • Two idler pulleys
    Gates 38008
    Gates 36101
  • 70″ serpentine belt

Low-Mount-Alternator-Item-Number-LS-0267-02

High Mount Alternator

High-Mount-Alternator-Item-Number-LS-0209LS power steering delete Alternator only bracket
Cost: $199.00 
 On Sale: $163.99  plus shipping



Detailed Description:

This Full Billet aluminum alternator relocate bracket for all LS engines 1999 to 2012 using the truck accessory drive. Works with 2010 to 2012 camaro accessory drive.

It will lower the alternator 1/2 inch below the top of a ls1 car intake and delete the power steering pump.
This kit will work with the stock truck water pump along with the 1999 to 02 Camaro water pump when using the correct spacers. ( LS Brackets spacers LS-0214 )
Designed to work with all ls truck alternator from 105 amp to 160 amp

Comes complete with 6061 billet aluminum spacers, two plates, GM spec. zinc coated bolts and instructions.
Starting point on belt with 105 amp alternator. Gates K060721

The needed idler pulley is a Gates #36101
Bracket also available for the 1999-02 Camaro accessory and the Corvette accessory drive.