LS | LS Brackets

1996-98 Chevy, GMC 1500 2500 LS AC swap or relocation bracket kit

TMC — Tue, 30 May 2023 22:27:56 +0000

Use the Factory A/C compressor from 1996-98 Chevy 5.7 engine.

Keeps your factory 1996-98 Chevy 5.7 lines.

Must use a 145 amp LS alternator.

Comes with both the A/C relocation bracket and Alternator bracket.

Must use your factory power steering alternator bracket. Not included in this kit.

LS TT Turbo Mount Stock Truck Exhaust Item Number LS-0208

TMC — Tue, 30 May 2023 21:49:32 +0000

This Bracket is made to work with Front Mount custom built turbo kits Stock 4.8,5.3,6.0 exhaust manifolds with a ls motor You don’t have to buy other exhaust manifolds like other kits.

This kit fits 1999 to 2012 GM Trucks and is a Alternator Power steering pump relocation bracket kit for Gen III/IV LS. This bracket relocates the Alternator and Power steering pump on the 4.8, 5.3, 5.7, 6.0, and 6.2. This kit is used when doing a engine swap or building a hot rod and installing a LS1, LS2, LS3, LS6 or any other performance LS car intake manifold on the truck engine. Moves the alternator down to 3/4 inch below the factory ls car intake to clear the hood.

It also moves the Power steering pump up and in to clear the frame. This kit will let you install any LS 99 to 2012 truck engine into a older car or pickup.

What is really nice about my design is that it reuses the factory LS alternator.

Power steering pump will come from a 1988 to 1989 Chevy pickup. You can reuse your factory pump but must change the can on the back. No more Remote Reservoir to buy a cost saving of over 100.00 and you get a cleaner looking install.

Water pump spacers along with the car intake are required to install the LS car intake or any other performance intake manifold.

This bracket is to be used with truck accessory drive only.

This bracket will relocate your truck alternator to the side and down and your power steering pump in and up to clear the frame.

Comes complete with 6061 billet aluminum spacers, two plates, GM spec. zinc coated bolts and instructions

Items needed to complete the kit:

Two Idler pulleys
A new belt
Car ls1 intake
Power steering pump-AC Delco 36-517091, Atsco 7091,A-1 Cardone 207826,
Dorman Pulley 300-200
Dorman cap 82581

This kit will work with the 2010 Camaro water pump and the correct tensioner for the Camaro pump. Water pump (ACDelco 251-734 ) No spacers are needed when use this pump. LS1 Camaro water pump. Water pump spacer kit only if your using a 2002 Camaro water pump.

LS Truck SUV Alternator Relocation Bracket Item Number LS-0203

TMC — Tue, 30 May 2023 21:09:22 +0000

This alternator relocate bracket is designed to lower your alternator down 3/4 inch below the top of a LS1,LS2,LS3 intake manifold. It will retain the power steering pump in the stock position.

This bracket is made so you can run a LS1,LS2 or any performance LS car intake manifold on the truck or SUV engine to gain hood clearance.

Works on any 4.8,5.3,5.7,6.0,and 6.2 Chevrolet 1999 to 2013 Including Gen III/IV truck engines.

This kit will work with the stock water pump and tensioner. We recommend using a 2002 Camaro z28 tensioner.

When installing a car intake you may need to use a 2002 Camaro water pump and LS-0214 spacer kit to clear the throttle body.

This bracket will work with the 2010 Camaro water pump and the correct tensioner.

Comes complete with 6061 billet aluminum spacers, two plates, GM spec. zinc coated bolts and instructions.

Items needed to complete the kit:

Gates pulley # 36101
Gates belt # K060735

You will need a power steering pump puller and installer. These tools can be rented free from your Auto Zone or O’Reilly.

LS LQ4 LS1 Camaro High Mount Alternator Bracket

TMC — Tue, 30 May 2023 20:38:12 +0000

This relocate bracket is designed to move the 1999 to 02 Camaro factory alternator to the top of the engine.

This kit does raise the factory power steering pump up 1″ higher than normal.

You will reuse your existing power steering pump, Idler pulley and alternator. If you’re having alternator clearance issues this is the bracket you need This kit will work with the stock water pump and tensioner comes complete with 6061 billet aluminum spacers, GM spec. zinc coated bolts and instructions we only use Zinc coated bolts to prevent rust.

Instead of cheap black bolts that will rust over time. The required belt ( Gates K060760 ) 145 amp alternator The required idler pulley if you don’t have your factory one ( Gates 36101 ) Comes with a complete set of instructions and part numbers.

All replacement parts can be bought from your local parts store. All my kits use standard off the shelf parts for easy replacement, another great feature.

Please Email with any question.

This bracket has been dyno tested and I have tons of happy customers Designed to work with all ls Truck/SUV alternators Comes complete with 6061 billet aluminum spacers, 3/8 billet plates GM spec. zinc coated bolts and instructions.

This brackets is also available for the Chevrolet 1999 to 2013 including Gen III/IV truck, LY6,L92 engines accessory drive.