Power Steering | LS Brackets

1998-02 LS1 Camaro GTOS10 LS1 Alternator Power Steering Pump Bracket

TMC — Tue, 30 May 2023 19:29:29 +0000

This is LS Brackets New State of the art accessory drive power steering/alternator bracket

This bracket is CNC cut from 6061 3/8 billet aluminum

It is designed to work with the Factory Camaro power steering pump and alternator only
The factory Reservoir from the Camaro with not fit this bracket.
Requires a Alternator from 1998-02 Camaro or 1999 to 2013 Truck/SUV

This is the most user friendly alternator, power steering relocate bracket
on the market today.

This Bracket moves the factory alternator up high and
the factory power steering pump down low on
your LS power plant upgrade.
When using the Camaro crank pulley you gain the needed radiator clearance
for your fans. You will also save money not having to purchase water pump spacer kit
It gives frame clearance in older vehicles where the factory
alternator hits the frame and steering box.
There is a complete set of instructions with part numbers
Everything can be purchased from your local parts store.

Please Email with any question.

Designed to work with the Camaro/Truck/SUV ls 105 amp alternator

Comes complete with 6061 billet aluminum spacers, 3/8 billet plates, GM spec. zinc coated bolts and instructions.

Power Steering Alternator

TMC — Mon, 29 May 2023 20:35:37 +0000

Does not include the pictured A/C bracket or components Demonstration purposes only

Featured in 2018 May issue Street Rodder Magazine

2014-17 GM Generation V LT, LT1,LT4, L83 L86 5.3, 6.2. Alternator and Power steering backet system ONLY.

This brackets is used to retrofit any L83,L86,LT LT1 LT4 series engine into any 1960s to mid 1994 vehicle

Includes two 6061 billet aluminum plates and all necessary hardware to install the bracket and water pump. ( NO EXPENSIVE WATER PUMP SPACER TO PURCHASE )

You must purchase the power steering pump, water pump,alternator and tensioner separately .

Items need to complete the kit:

2010 Camaro water pump and tensioner assembly.
2010 Camaro Power steering pump,pulley and alternator.
2010 Camaro lower Idler pulley.
Gates Belt to complete the list.
The doner LT Generation V engine must have the Truck/Suv crank pulley for this to work.

The LT4 engine with the corvette spacing must be changed to the Truck/Suv spacing to work.

The VVT solenoid must be rotated for this water pump to fit. (Rotation plate included)
Will work with the Factory A/C compressor that is down low on the LT engine.
Will work with Factory Vacuum pump.

Power Steering Pump Hose Adapter Item Number LS-0219

TMC — Mon, 29 May 2023 20:06:41 +0000

This fitting was designed to adapt your late style GM LS1,LS2,LS3,LS6,LS9,LQ4,LQ9 and most power steering pump 1988 to 2013 pump with O-ring fitting line to Early style GM pump with a flared tube.

Power Steering Pump Fitting Item Number LS-0265

TMC — Mon, 29 May 2023 19:58:14 +0000

This relocate idler bracket is designed to move the upper pulley out of the way so you can run a LS1,LS2 or any performance LS car intake manifold on the truck engine.

Works on any 4.8,5.3,5.7,6.0,and 6.2 Chevrolet 1999 to 2013 Including Gen III/IV truck engines.

If your using a car intake you must use a 2002 Camaro water pump and spacer kit.

You must make a small cut in your factory bracket to remove the original mounting area of the factory pulley for a car intake .

You will reuse your factory pulley. Belt part number is Gates K061005 (for 105 amp alternator)

Bracket comes raw steel and can be painted.

Comes complete with 6061 billet aluminum spacers, one plates, GM spec. zinc coated bolt and instructions.